Utilization of Additive Manufacturing for Rapid Repair in Military Applications
DOI:
https://doi.org/10.3849/aimt.02032Keywords:
additive manufacturing, battle damage repair, rapid repair, system analysis, system designs, logistic chainAbstract
This study explores the application of Additive Manufacturing (AM) to improve the efficiency and responsiveness of spare part production in military maintenance, with a focus on Expedient Repair (ER) within the framework of Battle Damage Repair (BDR). The paper evaluates the limitations and key implementation considerations of various AM technologies in field-based repair scenarios, including classification of spare parts by criticality, material selection, design constraints, and manufacturing feasibility. A real-world case study is presented, encompassing all critical phases of the process: (1) iterative design and prototyping; and (2) reverse engineering and remanufacturing of a brake fluid reservoir for a selected ground platform-a light tactical multirole vehicle. The results validate the utility of AM in producing functional, field-ready components under operational constraints, facilitating accelerated repairs, minimizing logistical demands, and enhancing platform readiness during high-intensity military engagements.
References
BERMAN, B. 3-D Printing: The New Industrial Revolution. Business Horizons, 2012, 55(2), pp. 155-162. https://doi.org/10.1016/j.bushor.2011.11.003.
MOHR, S. and O. KHAN. 3D Printing and Its Disruptive Impacts on Supply Chains of the Future. Technology Innovation Management Review, 2015, 5(11), pp. 20-25. https://doi.org/10.22215/timreview/942.
MORECROFT, J.D.W. Management Attitudes, Learning and Scale in Success-ful Diversification: A Dynamic and Behavioural Resource System View. Jour-nal of the Operational Research Society, 1999, 50, pp. 315-336. https://doi.org/10.1057/palgrave.jors.2600696.
KHAJAVI, S., J. PARTANEN and J. HOLMSTRÖM. Additive Manufacturing in the Spare Parts Supply Chain. Computers in Industry, 2013, 65(1), pp. 50-63. https://doi.org/10.1016/j.compind.2013.07.008.
JUNG, S., L.B. KARA, Z. NIE, T.W. SIMPSON and K.S. WHITEFOOT. Is Addi-tive Manufacturing an Environmentally and Economically Preferred Alterna-tive for Mass Production? Environmental Science & Technology, 2023, 57(16), pp. 6373-6386. https://doi.org/10.1021/acs.est.2c04927.
ROJEK, I., D. MIKOŁAJEWSKI, J. KOPOWSKI, T. BEDNAREK and K. TY-BUREK. Energy Efficiency and Sustainability of Additive Manufacturing as a Mass-Personalized Production Mode in Industry 5.0/6.0. Energies, 2025, 18(13), 3413. https://doi.org/10.3390/en18133413.
POPE, G. and M. YAMPOLSKIY. A Hazard Analysis Technique for Additive Manufacturing. In: Better Software East Conference. Orlando: TechWell Corp, 2016, https://doi.org/10.48550/arXiv.1706.00497.
ISO/ASTM 52900:2021, Additive manufacturing – General principles – Fun-damentals and Vocabulary.
BUSACHI, A., J. ERKOYUNCU, P. COLEGROVE, R. DRAKE, C. WATTS and F. MARTINA. Defining Next-Generation Additive Manufacturing Applications for the Ministry of Defence (MoD). Procedia CIRP, 2016, 55, pp. 302-307. https://doi.org/10.1016/j.procir.2016.08.029.
BUSACHI, A., et al. Modelling Applications of Additive Manufacturing in De-fence Support Services: Introducing the AM – Decision Support System [online]. 2018 [viewed 2025-08-28]. Available from: https://publications.sto.nato.int/publications/STO%20Meeting%20Proceedings/STO-MP-AVT-267/MP-AVT-267-03B.pdf
DEN BOER, J., W. LAMBRECHTS and H. KRIKKE. Additive Manufacturing in Military and Humanitarian Missions: Advantages and Challenges in the Spare Parts Supply Chain. Journal of Cleaner Production, 2020, 257, 120301. https://doi.org/10.1016/j.jclepro.2020.120301.
Marine Corps Order 4700.4 – Additive Manufacturing Policy [online]. 2020 [viewed 2025-08-28]. Available from: https://www.marines.mil/Portals/1/Publications/MCO%204700.4.pdf
NATO Logistics Handbook [online]. 2012 [viewed 2025-08-28]. Available from: https://archives.nato.int/uploads/r/nato-archives-online/d/6/9/d690cd82d2a2db0250c3a0f41eacad794cc36129899c173662ada35924ddce6b/1490_NATO-Logistics-Handbook_2012_ENG_HR.pdf
PREBILIČ, V. Theoretical Aspects of Military Logistics. Defense & Security Analysis, 2006, 22(2), pp. 159-177. https://doi.org/10.1080/14751790600764037.
GEBISA, A.W. and H.G. LEMU. Design for Manufacturing to Design to Addi-tive Manufacturing: Analysis of Implications for Design Optimality and Prod-uct Sustainability. Procedia Manufacturing, 2017, 13, pp. 724-731. https://doi.org/10.1016/j.promfg.2017.09.120.
DEVISSER, K.K. Qualification and Certification of 3D Printed Parts for Naval Ships [online]. 2017 [viewed 2025-08-28]. Available from: https://apps.dtic.mil/sti/pdfs/AD1053200.pdf
GONZÁLEZ, D.S. and A.G. ÁLVAREZ. Additive Manufacturing Feasibility Study & Technology Demonstration [online]. 2018 [viewed 2025-08-28]. Available from: https://eda.europa.eu/docs/default-source/projects/eda-am-study-and-strategic-report_v6.pdf
LAFALCE, J.T. AMC Repair Parts Supply Chain. Army Logistician [online], 2009, 41(3) [viewed 2025-08-28]. Available from: https://asu.army.mil/alog/2009/mayjun09/pdf/alog_mayjun09.pdf
WESTERWEEL, B., R. BASTEN, J. DEN BOER and G.‐J. VAN HOUTUM. Printing Spare Parts at Remote Locations: Fulfilling the Promise of Additive Manufacturing. Production and Operations Management, 2021, 30(6), pp. 1615-1632. https://doi.org/10.1111/poms.13298.
KNOFIUS, N., M.C. VAN DER HEIJDEN and W.H.M. ZIJM. Selecting Parts for Additive Manufacturing in Service Logistics. Journal of Manufacturing Tech-nology Management, 2016, 27(7), pp. 915-931. https://doi.org/10.1108/JMTM-02-2016-0025.
SAATY, T.L. Decision Making with the Analytic Hierarchy Process. Interna-tional Journal of Services Sciences, 2008, 1(1), pp. 83-98. https://doi.org/10.1504/IJSSCI.2008.017590.
IFTIKHAR, U. U.S Navy and Army Recruit 3D Printers for Effective Operations [online]. 2019 [viewed 2021-02-15]. Available from: https://3dprintingindustry.com/news/u-s-navy-and-army-recruit-3d-printers-for-effective-operations-150008/
JUDSON, J. Still in Service: ‘Ex Lab’ is the US Army’s Problem-Solving Mac-Gyver [online]. 2019 [viewed 2025-08-28]. Available from: https://www.defensenews.com/digital-show-dailies/ausa/2019/10/14/still-in-service-ex-lab-is-the-us-armys-problem-solving-macgyver/
THOMAS, D.S. and S.W GILBERT. Costs and Cost Effectiveness of Additive Manufacturing [online]. 2014 [viewed 2025-08-28]. https://doi.org/10.6028/NIST.SP.1176. Available from: https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.1176.pdf
DA PAM 750-1 CDR's Maintenance Handbook [online]. 2007 [viewed 2025-08-19]. Available from: https://www.scribd.com/document/62100274/DA-PAM-750-1-CDR-s-Maintenance-Handbook
FIELDMADE AS. - Increasing your combat readiness on-site[online], Field-made AS [viewed 2021-02-15]. Available from: https://fieldmade.no/nomad-series/. Department of Defense Additive Manufacturing Strategy [online]. 2021 [viewed 2025-08-28]. Available from: https://www.cto.mil/wp-content/uploads/2021/01/dod-additive-manufacturing-strategy.pdf
SALMI, M. et al. Digital Spare Parts [online]. 2018 [viewed 2025-08-18]. ISBN 952-60-3746-4.Available from: https://aaltodoc.aalto.fi/server/api/core/bitstreams/1989c16e-e7c5-40fd-bf6e-9775f0c5ede4/content
EKSTRÖM, T., P. HILLETOFTH and P. SKOGLUND. Differentiation Strategies for Defence Supply Chain Design. Journal of Defense Analytics and Logistics, 4(2), pp. 183-202. https://doi.org/10.1108/JDAL-06-2020-0011.
EPLER, I.J., M.D. ANDREJIĆ, M.A.MILENKOV and V.S. SOKOLOVIĆ. Con-cept of Logistics Prevention Development in a Defence System. Vojnotehnički glasnik (Military Technical Courier), 2017, 65(4), pp. 1027-1043. https://doi.org/10.5937/vojtehg65-8884.
NATO – STANAG 2418:2009, Procedures for Expedient Repair, Including Battle Damage Repair
NATO STANDARD AQAP-2070:2015, NATO Mutual Government Quality Assurance (GQA)
NATO – STANAG 7160:2006, Aviation Safety – AFSP-1(A)
NATO – STANAG 4107 RTIOS:2007, Mutual Acceptance of Government Quality Assurance and Usage of the Allied Quality Assurance Publications (AQAP)
ESPÍNDOLA, D., E.M. FRAZZON, B. HELLINGRATH and C.E. PEREIRA. Inte-grating Intelligent Maintenance Systems and Spare Parts Supply Chains. IFAC Proceedings Volumes, 2012, 45(6), pp. 1017-1022. https://doi.org/10.3182/20120523-3-RO-2023.00384.
ZHANG, Y., R.K. GUPTA and A. BERNARD. Two-dimensional Placement Optimization for Multi-parts Production in Additive Manufacturing. Robotics and Computer-Integrated Manufacturing, 2016, 38, pp. 102-117. https://doi.org/10.1016/j.rcim.2015.11.003.
Downloads
Published
License
Copyright (c) 2026 Advances in Military Technology
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
Users can use, reuse and build upon the material published in the journal for any purpose, even commercially.
